Posts Tagged ‘Utah Air Conditioning’

During the winter one of the easiest ways to burst your pipes open is to allow the water to freeze inside them. Busted pipes can be very costly to repair and cause serious damage. The best thing to do is take preventative action so you don’t have frozen water pipes during the colder months.

Insulating your Utah plumbing is the easiest and cheapest way to prevent water from freezing in your pipes. You can get insulation for your pipes at any home improvement or Utah plumbing store. You just need to now what size your pipes are and the amount of insulation, or length, that you will need.

When you purchase your insulation you will first need to measure you pipes. This will allow you to know the size sleeve you will need for your pipe. If you have never done this before it is a good idea to talk to a Utah plumbing professional and make sure you are purchasing the right insulation for your job, and to make sure that you measured your pipes correctly.

Pipes should be clear before you start working on the insulation. Clean out any dirt or debris that may be stuck on the pipes. This will prevent decay, warping and rusting.

Next, take your insulation sleeve to insulate your pipes. Insulation sleeves are the easiest way to insulate your plumbing since they have a small cut in them to allow you to fit the insulation snugly around the pipe. You simply open the sleeve and fit it on your plumbing.

You will know quickly if you got the wrong size. If it doesn’t fit snugly around the pipe you got the wrong size. You can still use sleeves that are larger than your plumbing, but it takes more work to make sure it is wrapped properly. A good idea would be to return the sleeves and get the right size.

You will still mostly like have to cut some of your insulation to make room for parts in your Utah plumbing. These parts are the bends and corner pieces in your pipes. Different angles may need to be cut to make the insulation fit around them.

When the pipes are all covered it is important to use duct tape to seal the insulation. Cover all cuts, slits and openings in the insulation. You want to make sure that the insulation is well sealed to protect the pipes.

If you are having trouble with your Utah air conditioning system, there are three things to check on. These are the electricity, air, and refrigerant. If any of these elements are having issues, the entire system will be effected and have a problem.

When your Utah air conditioning unit breaks down, look at the warranty. See what the warranty covers and when it expires. You may have coverage that is limited to certain parts of the unit, or you may have complete coverage. When it is under warranty take it to your favorite Utah air conditioning professionals to get it looked at and fixed.

If you do not have coverage you might want to check it out yourself.  Check to see if there is any air coming out of your AC unit. If you don’t feel any air there could be a problem with the fan or the fan motor.

You can also check to see if there is any electricity going to the unit. See if the light is lit indicating the unit is turned on. Lack of power would explain why the fan or AC unit would not be working correctly.

If the air conditioner is putting out cold air, but is not cooling down the room, there could be a problem with your room instead. If the room is not insulated enough the air conditioner would not be able to keep the room cool long. Be sure that all rooms are insulated and windows are closed when running your Utah air conditioning unit.

You can also check to see if the thermostat is working. If the thermostat is broken, or the temperature sensor is off, the unit won’t be working on the right setting. Room temperature plays a very important role with starting and stopping the AC unit.

There may be a problem with the compressor as well. The compressor motor relays the cooling. It processes and circulates the refrigerant around the cooling oil before it reaches the room. You can check whether the fan is working, or if you feel any cooler air when you turn the fan on higher speed.

You can also check to see if the refrigerant levels are at the right place. The refrigerant might be low enough to cause the unit to malfunction. Check for any refrigerant leakage as well. If there is any that could easily explain why no cool air is coming out of the unit.

Most North Americans spend 90% of their time indoors. And with all the modern emphasis on efficiency, some homes are so airtight that airborne particles get trapped indoors and can’t escape. So the Utah air conditioning inside many homes is two to five times more polluted than outdoor air!

Your furnace filter can help. If your current furnace filter is inefficient, old or dirty, the air you’re breathing is probably thick with particles. A failing filter means the job of cleaning the air falls to your hardworking nose and sinuses, which is probably why our culture is facing a wave of chronic respiratory diseases, and why we spend billions of dollars a year on costs linked to respiratory problems.

What is the main purpose of a furnace filter? Furnace manufacturers put inexpensive fiberglass filters into their furnaces to remove airborne particles that might damage the fan and the heating coil. Particle buildup can also decrease the efficiency of your furnace, as the furnace has to work harder to pull air through the intake.

More expensive filters can also improve the air quality in your house by removing pollen, bacteria and mold spores from the air. This is especially important if you or someone in your family suffers from allergies. You want your Utah air conditioning until to be in top shape, so keep an eye on the filter.

Almost everyone has one in their home, so how often do you need to change the furnace filter? Check the documentation that came with your furnace. Recommendations vary based on a number of factors: the type of filter that you use, how many pets you have, whether anyone in your home has allergies, etc.

If you use disposable fiberglass panel or electrostatic panel filters, you should change them anywhere from once a month to once every three months. Pleated filters generally last from three months to a year. Filters are relatively inexpensive and easy to change, so there is little reason to wait.

If you don’t change or clean your filter often enough the filter can get clogged with dust and other airborne particles. This forces your furnace to work harder to maintain airflow. This will reduce your furnace’s efficiency and can cause damage to your Utah air conditioning unit.

Generally you can buy your filter from any source. It’s easy to walk into any home improvement warehouse and find what you need in their selection. Check with a filter vendor or the documentation that came with your furnace if you are not sure.

Properly insulating your home will not only help reduce your heating and your Utah air conditioning costs but also make your home more comfortable.  You need insulation in your home to provide resistance to heat flow. The more heat flow resistance your insulation provides, the lower your heating and cooling costs.

Heat flows naturally from a warmer to a cooler space. In the winter, this heat flow moves directly from all heated living spaces to adjacent unheated attics, garages, basements, and even to the outdoors. Heat flow can also move indirectly through interior ceilings, walls, and floors—wherever there is a difference in temperature.

During the cooling season, heat flows from the outdoors to the interior of a house.  To maintain comfort, the heat lost in the winter must be replaced by your heating system and the heat gained in the summer must be removed by your cooling system. Properly insulating your home will decrease this heat flow by providing an effective resistance to the flow of heat.

A lack of insulation in the attic altogether is a serious energy deficiency considering that heat escapes upward.  This will drive your heating and Utah air conditioning bill up.  Pollution then occurs when this happens.

Insulation’s resistance to heat flow is measured or rated in terms of its thermal resistance or otherwise called, R-value.  R-value measures resistance to heat flow. The higher the R-value, the higher the resistance will be.

A certain number of inches of attic insulation really won’t tell you much. What you really need to know is the R-value of the material. If the insulation is blown fiberglass, that given number of inches may be R-30., if it’s cellulose, that same measurement may be as much as R-45. Each material, and often each brand of the material, has a different R-value.

In newer homes there must be insulation installed in the attic area as per Title 24 of the energy efficiency codes. This should be a minimum of R-30 rated with the thickness.  It varies depending upon the type insulation in place.

In both old homes as well as new ones, the condition of the insulation and the way it is installed will affect the way that it performs.  You may not need as much in the valleys as you do in the mountains.  But to improve your Utah air conditioning, you want to make sure you have properly installed insulation.

In Utah, air conditioning in the summer is almost as necessary for your home as a pair of skis for the winter.  Our weather here goes to extreme differences from season to season. It is almost impossible to live without something to cool you down when the thermometer rockets sky high.

Did you know that Americans spend over 22 billion dollars each and every year to cool down their homes with air conditioning?  That is quite a chunk of change to spend on cold air!  But if you ever tried to spend a summer without Utah air conditioning, you’d pay for every cent of it.

If you are scared of a high power bill from your AC unit, you might consider using a house fan instead.  While it might seem that they are one and the same, they are two very different devices.  Look at your household needs and one might work better than the other for you.

An air conditioner is a home appliance system that is specifically designed to remove heat from your home.  This is done with refrigeration and cooling of the indoor air.  The hot air is then deposited outside.

A whole-house fan is a large fan that mounts in your ceiling. It draws in fresh air from open doors or windows into the attic, where it’s then pushed out through attic vents. This creates a cool breeze through your house, and at the same time gets the super-hot air out of your attic.

An air conditioning unit in Utah could cool down your house immensely.  At the same time, it will cost you hundred of dollars to do so.  Consider your budget; you not only need to pay for installation, but use on a monthly basis as well.

A whole house fan might better suit you if you do not need to feel like you live in Alaska.  If you prefer warmer temperatures, but still enjoy fresh air being circulated, then a house fan is for you.  You will also power bills that are lowered a considerable amount.

Both are good choices, it just depends on what works best for you as a homeowner.  When deciding, take into consideration if you need your whole house cooled or just certain rooms.  A house fan can be more energy efficient but nothing beats a nice, cool home in the summer.

When you are serious about saving energy it is important to know different cooling methods in your home. Utah air conditioning units can keep your home cool during the summer, but it also uses a lot of energy to cool the home down. Here are a few super saver tips for saving money on your electricity bill this month.

Use your ceiling fans. Ceiling fans have proven to make the room anywhere from 3 to 8 degrees cooler because it circulates the air around you. The other nice part is that many people can install ceiling fans themselves if they are the type of do-it-yourself individuals.

Be sure that you have the ceiling fan going the right way. You want the air to blow down, and remove the hot air next to you. Check that it is moving counter-clockwise to blow the air down. Some fans have a switch that allows you to change fan directions.
Clean out your Utah air conditioning unit’s filter. Utah air conditioning units should have their filters cleaned, or replaced, every month. A dirty filter makes your AC to have to work much harder, which will not save you any money on your electricity bill.

A lot of nifty inventions have come out to help cool you down. One of those is a chillow pillow. The chillow pillow is filled with water and is supposed to keep your head cool while you sleep.

Another cool invention was made for people who can’t sleep with out their covers, even when it is extremely hot. A fan, called the Bedfan, works to save you from having to run your AC unit during the night just to keep you comfortable through out the night. It attaches right on your bed, and fans right under the covers. It is especially handy for people who are prone to hot flashes and night sweats through out the night.

Avoid having sunlight stream directly in to your home. You don’t want the sunlight to raise the temperature of your home by a lot. Use drapes on especially hot days to keep the temperature in your home cooler.

Don’t forget to use the old classic options. Come home, drench your shirt in cold water, and wear your wrung-out shirt. The moisture on the skin should cool you down, especially if you have your fans going in the home. If you’re worried about your furniture use a towel for your back.

Living in Utah can be quite a drag during the hot summers. It is always necessary to find ways to keep our homes cooler. We don’t want to have overheating issues.

A good cooling option is a whole-house fan. Whole-house fans are fans that are put in your home’s ceiling. It takes the hot air that is getting trapped in your home, and takes it up through the attic of the house and then pulls in the cooler air from outside through open windows.

Are whole-house fans better than AC units? Well, whole-house fans can quickly cool down a home. It is efficient as long as the air from outside is cooler. Even if it is a relatively warm day, a whole-house fan can still circulate the air to keep the hot air from just sitting there.

Whole-house fans are also less expensive than Utah air conditioning. Whole-house fans can be energy efficient and save you money on your electricity bill. A lot of whole-house fans are very environmentally friendly.

A main drawback with whole-house fans are that there is no filtering system in place. Whole-house fans draw air in through open windows. Utah air conditioning systems use a heat exchanger to keep the air filtered and clean so no pollen or allergens can bother those inside.

Also, Utah air conditioning units are a lot less noisy than whole-house fans. Whole-house fans are known for being really loud. They can easily upset normal household activities and make it hard to watch movies, socialize and even sleep.

It is also important to have the right vents in the attic so the whole-house fan can work. Whole-house fans, just like Utah air conditioning systems, need to be installed the right way if you want them to work correctly. The attic needs to have vents in place to push hot air out of the house when it is sucked in through the fan.

There is no right or wrong answer with whether an AC unit is better or a whole-house fan. Both have benefits. They can even both be used in your home. That is what we do in our home. It is up to you to decide what option is best for your home.

There are a lot of cool advantages that a room air conditioner can offer. However, before you go out and buy a room conditioner there are a few things to consider. You want to do a little research ahead of time so you know which Utah air conditioning unit is best for you.

Start by deciding what type you like best. The most common units are ones that are mounted in the window. Others options are to mount them in the wall, or use a portable air conditioner that uses the window as well.

Watch for the type of refrigerant the room AC unit uses. Most Utah air conditioning units are using R410A refrigerants. R410A refrigerant is more earth-friendly than previous refrigerants. Be wary of any Utah air conditioning unit that uses R-22 or other HCFC’s refrigerants.

It is always good to size up the room you want the room conditioner for. Most manufacturers will provide the size room their AC unit is good for. The AC unit should have a certain amount of square feet it will cover, and it should also list the amount of BTU or energy that is being used.

We all want to save money, so watch out for energy efficient AC units. Look at the EER (Energy Efficiency Rating) when searching for an AC unit. The higher the number, the less it costs to use it. When comparing AC units a unit with an EER rating of 11 is better than one with a rating of 6.

Another thing to consider is how long you will be using the AC unit for. Would you like to have one that is permanently there? Or perhaps you would like to remove it when the season changes?

Window units are good for switching out during the seasons, whereas wall units aren’t. Portable air conditioners also have the benefit of being able to be moved with in minutes, and are easy to transport. This can be a great option for someone who switches locations a lot.

If you do decide to use a window unit it is also important to make sure your unit will be the right size for your window. Measure the size of your window first before purchasing a unit. If you would like to keep it installed in a more permanent manner, there are off-season covers available to cover it during the wintertime.

What is the main difference between a central air conditioner and a room conditioner? What are advantages that one has over the other? Which one should I get?

These are all questions that we have to consider when choosing a Utah air conditioning unit. Living in Utah means really hot summers. It’s important to choose a good Utah air conditioning unit that will keep our homes cool with out breaking the bank.

When trying to determine whether to get a central AC unit or a room AC you need to consider the area that you are trying to cool down. What size are you looking for? Are you trying to cool off your office or are you hoping to cool down your entire home?

A room AC unit usually goes in a window, though a few can be installed directly in the wall. They are usually pretty easy to install, and can plug in to any electrical outlet. This can be nice if you don’t have a lot of time, and you don’t have to call someone from your Utah air conditioning company to come down and install it.

Room AC’s get their name because that is what they were built to cool. They only have enough power to cool down the room, not the entire home. Because they are only cooling one area of the home they do not use as much electricity as the central air units do.

It is very important to have the right size unit to cool your room down. Buying too small a unit will waste energy. It will have to keep running continuously, which will increase your energy usage. It’s much better to just buy the right size and keep your bills as low as they can be.

A central air conditioner will keep your home cooler. It does more than just one room. Contractors will need to come in and install this unit. They are more expensive to install, because they deal with a more detailed install then simply plugging the AC unit in.

Central AC units also have the privilege of being for the most part maintenance free. They are a lot quieter than room units, and are a very effective way of cooling down the home. If you like convenience, this is the option for you.

Utah air conditioning units can be wonderful things. They keep us cool and alive during extreme heat waves. However, when limited by a budget there are some things that you can do to cool yourself off without always having to crank on your Utah air conditioning unit.

Start by placing a fan near the window once the day starts to cool off. This can bring in cool air during the night, and help your home feel refreshed. Be sure to close the windows early in the morning time so you can keep the air in the room cool for as long as you can.

Remember to use your ceiling fan. Even on high speed, a ceiling fan will use less energy than your AC unit. Ceiling fans help to keep things cool by circulating the air around you and keeping the hot air moving.

Try to keep your lights turned off. Use as few lights as possible, since lights generate heat. When you leave a room, turn off those lights. This not only helps with the heat level, but also with your electricity bill as well.

Only use your AC when you have to. Turning on your Utah air conditioning unit every single time you are hot will waste a lot of energy. Instead, use your thermostat to guide you as to when it is appropriate to use your AC unit.

Draw your shades. The less sun that shines through the windows, the less heat there will be. Draw your shades in the early morning and try to keep things as cool for as long as you possibly can.

Don’t forget the different alternative cooling methods available. Add water to your arms, or even to your sleeves, and sit next to a fan. This can cool your temperature down a lot. When you dry, re-wet your arms and shirt.

Another alternative method is to use your bathtub. Fill it with cool water and get in. After the temperature gets warmer, you can let some water drain and then refill it with more cool water.